Skip to content Skip to footer

EPOXY with 4.5 kg set

Add to Wishlist
Add to Wishlist
Category: Product ID: 18525

Description

PRODUCTION DESCRIPTION

Epoxy Compound and Hardener for Road Safety

Specification : PART A EPOXY 1 KG : RESIN
Appearance Liquid : Clear
Specific gravity @ 25°C : 1.05
Viscosity @ 25°C, poises : 11000-12000
Colour : Clear
Amine value by HCIO4 method Mg of KOH/gm : 450
Mixing Ratio: Epoxy Compound:Resins:Hardener:Filler : 1000:500:3000
Working Timing : 25°C for min 25 minutes
Hardener after 8 hrs. : Shore D-40
Tensile Strength Kgs/cm2 : 250-300Kgs/cm2 – 90MPA
Compressive Strength : Min 600Kgs/cm2 – 0.48 GPA
 
Hardener’s Specification
Solids : 95 Min
Viscosity (cPs, @ 25 deg C) : 500 ~ 1500
Colour : Orange-Brown
Amine Value (mg KOH/g) : 360-420
Density (g/ml@25 deg C) : 0.99 ~ 1.05
AHEW : 95
Flash Point (deg C) : >104
Gel Time (mins, 100gm @ 25 degC) : 20-30
PHR* 0 for EEW-190 : 50±5
Deg C : 3-4hrs.
Fully Cured : 7 Days
Cross hatch : 5B
Pencil Hardness : <4H
Chemicals Resistance : Resist to mild acid and base Poor resistance to solvent
Compressive Strength (mPas.) : >60 mPass
SILICA SAND PART C 3Kgs
Product Identifier : Silica Sand, Filter Sand
Other means of Identification : Quartz, Crystalline Silica, Silica Dioxide, Ground Silica
Product use and Restrictions on use : Use for Epoxy Compound